其他冷光源 紫外线灯 LED固化光源 365nm/385nm/385nm/405nm紫外线灯

  1、传统固化机产生的紫外线亮度很亮，热量很高，光谱很宽但真正在有效固化作用的某紫外光谱段却只占其一部分的能量，有相当大一部分是在可见光段（杂光）和产生热量，对操作者的眼睛损伤严重并且容易使加工工件热变形。 
    2、节能的UV LED点光源，发出的是高纯度365nm单色紫外光，是冷光源；工件温度只上升3度左右，加工件不会变形，其能量高度集中在具有有效固化作用的某紫外光谱段，实际使用效果和光强和高压汞灯固化效果不相上下，使固化时间缩短至0.5-5秒。 
二、UV LED点光源大幅降低生产成本。 
    1、机身小轻便，可以很容易地把它集成到自动装配流程中，或者作为一个完整的桌面系统使用。 
    2、照射头可通过电脑控制，也可以根据实际需要选择手动或自动控制操作，并自行设定光照射所需时间（精确到0.01S）及功率，进一步支持高精度的接合需求，减少人为操作的时间误差。 
    3、UV LED固化设备几乎不产生热量，不易碎，不含汞,维护成本很低。 
    4、由于采用UV LED的发光方式，寿命长达25000小时以上（持续点燃寿命）采用节能设计，只有在需要照射时才点亮，耗电量低。 
三、UV LED配备的特制聚光透镜总成也使它的能量高度集中在固化点上，提升固化效率，每台设备可以连接4个照射头（光头）。

1, the traditional curing machine ultraviolet luminance is very bright, quantity of heat is very high, a UV spectrum spectrum is wide but is really effective curing effect accounts for only a portion of its energy, a large part is visible in the segment (stray light) and produce heat, eye damage to the operator is serious and easy to make the processing thermal deformation.

UV LED point light source 2, energy saving, is issued by the high purity 365nm monochromatic ultraviolet light, is a cold light source; the workpiece temperature rose by only 3 degrees, not deformed parts, its energy is highly concentrated in effective curing effect with a UV spectrum section,actual effect and Guang Qianghe effect to be roughly the same high pressure mercury lamp curing, curing time is shortened to 0.5-5 seconds.

Two, the UV LED point light source and greatly reduced the cost of production.

1, small body light, can easily integrate it into the automatic assemblyprocess, or as a complete desktop system using.

2, the irradiation head can be controlled by computer, can choose according to the actual need of manual or automatic control operation, andset up their own light exposure time required (accurate to 0.01S) and power, bonding needs further support high precision, reduce the time ofhuman errors in operation.

3, UV of LED curing equipment have almost no calories, not fragile, do not contain mercury, lower maintenance cost.

4, because the light emitting mode is used for UV LED, lasts more than 25000 hours (sustained ignition life) the use of energy-efficient design, litonly in need of irradiation time, low power consumption.

Special condensing lens three, UV LED is equipped with the assembly to itsenergy is highly concentrated in solidifying point, improve the curingefficiency, each device can connect 4 irradiation head